More Filters
Mustang Survival has been Saving Lives since 1967 and our mission is to deliver the ultimate user experience on the water through our inspired technical solutions. Mustang Survival is the Brand of choice delivering unprecedented engineered technologies combined with creative design to create apparel solutions that protect elite rescue workers, coast guards, Navy SEALs, fishermen, sailors, kayak...
Here we have a 'must have' a rare desirable rebuilt Tachometer dash cluster for a 67Shelby GT350 or GT500, or an Eleanor or Bullitt clone. This set up includes a 140 mph speedometer (used in the 67/68Shelbys ) with the Trip Odometer feature, as well as an 8000 rpm tachometer. It has a nice reproductiondeluxe brushed aluminum dash bezel,new clear lenses and features a work with your harness 3 wi...
Here we have a complete set of original Ford Deluxe Seat Backs for a 1967 Mustang or Shelby with the upgraded interior. These molded plastic seat trim pieces are bordered by a stainless steel molding. This redesign is referred to as the interior decor group option (luxury version interior). These molded panels were fastened to standard seats and require a bracket set to secure these in place fo...
Up for sale is a New Old Stock, or NOS, Driver Side Fender for an original Ford 1967 Mustang. This fender panel is in good condition and is ready to install. It comes with all mounting holes punched at the factory but does not come with pre-drilled holes for emblems or lettering. If you need help determining the proper placement of these we would be happy to help. Ford factory engineering assur...
Here we have a set of boot-well molding trim for a one year 67 Mustang or Shelby Convertible. These stainless steel trim pieces are often discarded or bent beyond repair during restoration and maintenance of these classic convertibles. Often seen with extra mounting holes, this set has NO added holes, and a complete set of support mounting clips and just add snaps (shown in photos).We have insp...
Here we have an all original 1967 (only) Shelby, Mustang or Cougar Clutch and Power Disc Pedal Set. The Power brake option was needed for many of the big Block cars to stop and standard on all Shelby's. The boosters both Midland and Bendex demanded a different fulcrum or pivot point at the top than the common middle manual brake pedal point. Even the clutch and brake pedal support was different...
Here we have just one of our extensive inventory of toploader 4 speed transmissions. This unit, a factory equipped unit with original 4 speed shifter, is correct for a 390 or 428 Mustang or Cougar. Mustang offered 2 types of transmissions, the toploader which is more durable and the T10 which was replaced by the toploader. This piece, the durable toploader, is equipped with the shifter at the r...
Similar
Mustang Survival has been Saving Lives since 1967 and our mission is to deliver the ultimate user experience on the water through our inspired technical solutions. Mustang Survival is the Brand of choice delivering unprecedented engineered technologies combined with creative design to create apparel solutions that protect elite rescue workers, coast guards, Navy SEALs, fishermen, sailors, kayak...
Here we have offered a rebuilt and reconditioned steering wheel. In 1967, the Cougar used a complete wood grain steering wheel as the deluxe wheel of choice, while your Lincoln/Mercury dealers, trying to one-up the Ford boys, offered a split wheel having the back side match the interior of the car and the front side dressed out with the classic wood grain look.We offer this wheel to you uncrack...
Up for sale is a New Old Stock, or NOS, Passenger Side Quarter Panel for an original Ford 1967 Mustang Coupe. This fender panel is in good condition and is ready to install. It comes with all mounting holes punched at the factory but does not come with pre-drilled holes for emblems or lettering. If you need help determining the proper placement of these we would be happy to help. Ford factory e...
Here we have an original NOS "star" center cap for a 1967 Mustang with the blue Mustang insert and measure 3 1/4" in diameter. These were used on the popular styled steel wheels and have the correct Ford part number of C7ZZ-1130-A. This auction is for one center cap, although we have four available. If you need a full set just let us know and we will put up an auction just for you.These never i...
Here we have a 1967 / 1968 NOS Ford Mustang headlight extension assembly for the left hand driver s side Ford part number C7ZZ-13008-D. As seen in the pictures you will find this assembly is complete the headlight bucket with trim and all the mounting hardware. As is expected nothing fits quite like the original pieces. Keep in mind the fender lines begin at the extension and of course the desi...
Here we have an original complete 6 piece set of factorycFord Motor Mount set up for a 67 to 70 390, 427, or 428 Cobra Jet. Designed for the 67 Big Block Mustangs and Cougars it was also used in the 67 Shelby GT 500. In additionit is also correct for any 1967 68 69 70 GT Mustang Mach 1 or Cougar XR7 with the awesome FE engine power plantTo install these big block motors Ford had to redesign the...
Here we have an Factory fiberglass rear deck lid for a 67 / 68 350 GT Shelby and or GT 500 Fastback, as well as 67 / 68 Eleanor or a Clone Shelby. This is an original trunk lid with factory design offers a inner support frame unlike aftermarket copies. The 2 halves have not split from the underside to the topside. This gennie, while in seen better days condition offers the crisper lines which f...
Here we have a new NOS Ford Power Steering Oil Cooler for the 1967 and 68 Shelby GT 350 . This piece was used on the 289 Hipo and the 302 4 Barrel J Code motors helping to keep the power steering pump cool under heavy use and high-stress operation. Overall, these units helped to keep the whole power steering system from fading due to hydraulic overheating. Offered with most performance cars, th...
Your Listing Here